1. Manuals
  2. Brands
  3. Takara Belmont Manuals
  4. Indoor Furnishing
  5. W SWING YUME
  6. Operating instructions manual

Takara Belmont W SWING YUME Operating Instructions Manual

Takara belmont wash unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
W SWING YUME
Operating Instructions
Thank you for purchasing this Takara Belmont product.
Please read the Operating Instructions carefully before use and use the product correctly.
Failing to read the Operating Instructions before use may lead to accidents.
• Keep this booklet safe near the product so that it can be referred to promptly and be sure to read this
booklet again when necessary.
• This product is an industrial appliance designed for use by hair and beauty salons. Only use this
product for its intended purpose.
• The product must only be used by those who have undergone appropriate training, such as hairstyl-
ists and beauticians.
• Installation and assembly should be consigned to Takara Belmont or the vendor designated by Takara
Belmont.
If the Operating Instructions become illegible due to stains and tears, or if this booklet is misplaced,
please request a copy from Takara Belmont using the inquiry number shown in the box below.
Takara Belmont Wash Unit
AY-YMW*
Model number
1
(AY-YMWNH is shown in the figure)
2022.10 (version 1)
1A0X4XA0 (inquiry number)

Advertisement

Table of Contents
loading

Related Manuals for Takara Belmont W SWING YUME

Summary of Contents for Takara Belmont W SWING YUME

  • Page 1 • The product must only be used by those who have undergone appropriate training, such as hairstyl- ists and beauticians. • Installation and assembly should be consigned to Takara Belmont or the vendor designated by Takara Belmont. If the Operating Instructions become illegible due to stains and tears, or if this booklet is misplaced, please request a copy from Takara Belmont using the inquiry number shown in the box below.

  • Page 2: Table Of Contents

    Table of Contents Introduction Description of Warning Symbols .................. Safety Precautions ...................... Precautions for Use ....................Precautions for the Basin Product ................Precautions for Resin Plated Parts ................ Position for Attaching the Warning Label .............. Before Using the Product ..................Accessories ......................

  • Page 3: Description Of Warning Symbols

    If an accident occurs because of a failure to follow the Safety Precautions, Precautions for Use, Precautions for Basin Products, and Precautions for Resin Plated Parts, Takara Belmont will not be responsible for any damage or risk to the person using this product or those around them due to accidents.

  • Page 4: Safety Precautions

    • The product must be installed according to the work instructions. The product must be installed and assembled by specialist personnel (Takara Belmont or The vendor designated by Takara Belmont). The product must be installed on a flat, durable surface that is secure.
  • Page 5 • If the plating of the metal faucet parts (tap and thermostatic control knob) peels off, contact your local Takara Belmont dealer immediately and have these replaced. Continued use without replacing these parts may result in injury. Do not apply shock to the product •...
  • Page 6 Safety Precautions (Please be sure to follow these precautions.) CAUTION When using or handling the product ... Do not use the product in locations where freezing is expected • This may cause damage and water leakage accidents. Repair of damage caused by freezing will incur a charge even during the warranty period. If there is risk of freezing, use heating to keep the room temperature from dropping below 0°C.

  • Page 7: Precautions For Use

    Precautions for Use Do not use for any purpose other than hair and beauty salon treatment • This product is an industrial appliance for use in hair and beauty salons. The product must only be used by those who have undergone appropriate training, such as hairstylists and aestheti- cians.
  • Page 8 Precautions for Use Avoid touching the hot water pipe • The hot water pipe is hot to touch. Avoid touching the pipe directly. Set the temperature for supply of hot water to the device at 80°C or lower • Failure to do so may result in a malfunction or damage to the tap, check valve, flexible connector, and thermostatic control knob.

  • Page 9: Precautions For The Basin Product

    Check that there are no scratches, cracks, or peeling on the plated surface of the tap and thermostatic control knob. If the plating has peeled off, discontinue use imme- CAUTION diately and contact your local Takara Belmont dealer. Continued use without replacing these parts may result in injury. Example of peeling...

  • Page 10: Before Using The Product

    Before Using the Product • This product is a hair washing device for use in washing the hair in the rear position* and head spa. • The back approach* is used when this product is intended for use with the user in the standing or sitting position.
  • Page 11 Names of Parts Basin Shower head Drain cap Shower head holder Head pillow Neck cushion Basin Hair catcher Basin cover Intermediate hose (consumable goods) Shower hose (consumable goods) The outer cover is made of resin. There may be sections with streaks or color variations; however, these occur in the process of manufacture and are not considered an abnormality and represent no problems in quality.

  • Page 12: Removal Of The Shower Head Holder Cover

    Removal of the Shower Head Holder Cover Turn the cover counterclockwise Turn the cover until it stops (about 5°). Cover Pinch the front and back of the cover to deform and remove the catch [Image] Catch Do not apply excessive force when removing the cover of the shower head holder. CAUTION Force applied to the assembled part may cause damage to the parts.

  • Page 13: Attaching The Neck Cushion

    Attaching the Neck Cushion Align the neck cushion as shown in the figure and fit the neck cushion to the mount- ing fixture Make sure that the neck cushion faces the correct direction. Be sure that the entire neck cushion fits inside the basin. Neck cushion Snap button...

  • Page 14: Attaching The Head Pillow

    Neck cushions and head pillows should be considered consumable goods. These should be replaced if they are stained significantly or if the surface becomes deteriorated. Contact your local Takara Belmont dealer to replace the neck cushion and head pillow. Using the Shower Head Use the selection switch to change between shower mode and foaming mode.

  • Page 15: Adjusting The Amount Of Hot Water

    • If the water is drained slowly, the pipe may become clogged with rubbish or other CAUTION matter. Discontinue use of the product and contact your local Takara Belmont dealer. • Remove metal articles, such as rings and watches, before operating the tap.

  • Page 16: Adjusting The Temperature Of Hot Water

    • Check that there are no scratches, cracks, or peeling on the plated surface of the thermostatic control knob. If the plating has peeled off, discontinue use immediately and contact your local Takara Belmont dealer. Continued use without replacing these parts may result in injury.
  • Page 17 • Contact your local Takara Belmont dealer for adjustment operations, including the adjustment of the temperature for the hot water supply, adjustment of cold and hot water pressure, and adjust-...

  • Page 18: Filling The Basin With Hot Water

    • If the water is drained slowly, the pipe may be clogged with rubbish or other matter. Discontinue use of the product and contact your local Takara Belmont CAUTION dealer.

  • Page 19: Fix The Neck Device (During Intermediate Rinsing During Perm Operation)

    Fix the Neck Device (during intermediate rinsing) The following preparation must be performed before allowing the customer to lie down. Rotate the head pillow section as Lock the neck fastening pin pushed shown in the figure below inwards by turning clockwise Head pillow section Remove the head pillow Neck fastening...

  • Page 20: Wash The Hair

    Wash the Hair Check that the chair and the basin have been returned to the initial Wall “Initial position” position CAUTION Mirror Rotating the chair without returning to the initial position may cause accidental contact of the chair Chair with the product and accessories, resulting in damage.
  • Page 21 Wash the Hair Lock the chair rotation * See the operating instructions of the chair being used on how to lock the chair rotation. “Position for treatment” Move the basin slowly to the position for treatment and lock the arms * A slight click can be felt when locked.
  • Page 22 Wash the Hair Allow the customer to lie down Backrest of the chair Basin Lower the backrest of the chair while supporting 15mm the head of the customer, then lower the custom- er’s head gently onto the neck cushion. * See the operating instructions of the chair being used on how to lower the backrest of the chair.
  • Page 23 Wash the Hair Check that the face angle is appropriate Check that the face angle is set as suitable for each posture as shown in the figure below. If the angle is not correct, make fine adjustments by asking the customer to move forward or backward.
  • Page 24 Wash the Hair Move the arm to the initial position Hold the basin with both hands and move to the initial position. * The basin clicks slightly and becomes locked when returned to the initial position. Keep the hands and fingers away from the rotating section of the arms. WARNING This may lead to injury caused by jamming.
  • Page 25 Wash the Hair Move the chair to the initial position * See the operating instructions of the chair being used on how to lock and unlock the chair rotation. Rotate WARNING Chair • Return the chair to the initial position and lock the chair rotation before guiding the customer to leave the chair.

  • Page 26: Maintenance Method

    Maintenance Method Maintenance should be performed after using the product to keep it clean at all times. Stains left uncleaned may lead to the growth of mold. WARNING Do not wash the device with water. This may lead to a malfunction. Some of the product’s metal parts and mechanical sections may be sharp.
  • Page 27 Maintenance Method Basin Around the mounting Apply cream cleanser to a soft sponge that has been wet with fixture of the head pillow water and drained fully and use this to wipe off the stains. After cleaning, rinse fully with water and wipe carefully with a dry cloth.
  • Page 28 • If the plated surface of the thermostatic control knob or the tap (resin plated parts) has peeled off or has become scratched, discontinue use immediately and contact your local Takara Belmont dealer. Hand injuries may occur from the peeling of the plated surface.
  • Page 29 Maintenance Method Shower head O-ring(consumable goods) Shower head Turn the shower head plate counter- clockwise to detach, then remove Rubber gasket three parts (shower head plate, (consumable goods) foaming water outlet, rubber gasket) Do not remove the O-ring. Counterclockwise Clean (rinse) the shower head plate Remove •...
  • Page 30 Neck cushions and head pillows should be considered consumable goods. These should be replaced if they are stained significantly or if the surface becomes deteriorated. Contact your local Takara Belmont dealer to replace the neck cushion and head pillow. • Chemicals adhered to the neck cushion and head pillow should be washed off...
  • Page 31 Maintenance Method Cover The cover of the shower head holder should be replaced if it falls off easily. Contact your local Takara Belmont dealer to replace the cover of the shower head holder. [How to replace] Shower head Removing the shower head (right figure)
  • Page 32 If supply pipe supply pipe water leakage has occurred, contact your local Takara Belmont dealer because the pipe may be damaged. Spread the cloths over the floor around the hot and cold water pipes...
  • Page 33 • Open the maintenance cover and check for water spilled onto the floor • Check for water spilled around the maintenance cover and side panel If water leakage has occurred, contact your local Takara Belmont dealer because the pipe inside may be damaged.

  • Page 34: Troubleshooting

    Troubleshooting If any of the following problems occur, perform checks before requesting repairs. If the device does not operate correctly after implementing the following measures, discontinue use immediately and contact your local Takara Belmont dealer. Problem Items to check Measures to implement...

  • Page 35: Daily Inspection

    Contact your local Takara Belmont dealer because this section between the shower head may lead to water leakage accidents. plate and the main unit of the...
  • Page 36 Contact your local Takara Belmont dealer if the movement of the shower hose is not smooth after replacement of the mohair tape. Are the areas other Check that the areas other than This may cause device malfunction or difficulty in...

  • Page 37: Parts For Regular Replacement

    We will not be held liable for harm, damage, and defects caused by the failure to replace these parts within the designated period. Contact your local Takara Belmont dealer for the replacement operation.

  • Page 38: Consumable Goods

    In the case of significant wear and deterioration or damage, inspection or replacement of the parts will be necessary. Please contact your local Takara Belmont dealer immediately. Consumable goods (the following items are not covered under the guarantee and incur a charge) ◦Neck cushion...

  • Page 39: Specifications

    Specifications Model number Basin (L specification): AY-YMW*L Basin (H specification): AY-YMW*H Outer dimension Refer to the Product Dimension Diagram [pages 40] Range of motion of the rotating arms -47° to 47° Range of motion of the basin -100° to 100° Neck height Basin (L specification): 800 mm Basin (H specification): 900 mm...

  • Page 40: Product Dimension Diagram

    Product Dimension Diagram [Uni t : mm] 1064 Dimensions marked with an asterisk (*) can be moved to the same angle in the other direction. TAKARA BELMONT CORPORATION 1-1, 2-Chome, Higashi-shinsaibashi,Chuo-ku,Osaka,Japan TEL : +81-6-6213-5945 FAX : +81-6-6212-3680 Printed in Japan...

Table of Contents