Table of Contents
Advertisement
Drain cap
Wash around the drain cap, and remove any hair or dirt from solvents.
The drain cap is a consumable supply.
If it is extremely dirty, remove the packing from the drain cap, wash
with detergent solution diluted using water, and rinse carefully with
water.
Replace the packing if degradation causes water to leak quickly when
the basin is filled with water. (available at additional cost)
The drain cap must be detached from the drain
outlet when the product is not in use. If the lid is
not detached, the lid may accidentally close, and
Caution
the water may overflow the basin from the failure
to notice water discharge, thus resulting in water
leaks.
The drain cap should be handled carefully. It may
break if it is dropped.
The drain cap gasket is fixed on the drain cap. If you try to remove it forcibly, the gasket may be
damaged and the water in the basin may decrease at a faster pace.
Cover
Wipe clean with a soft, dry cloth. If they are extremely dirty, wipe with detergent diluted with water, and
always wipe them dry.
Never use volatile chemicals such as thinners, alcohol, nail polish remover, gasoline or kerosene,
cleaning products such as wax with a scourer, a sponge with a scourer, detergents that include
Caution
organic solvents, acidic, alkaline or chlorine-based detergents, or scouring pads. Failure to follow
this instruction may cause scratches or discoloration.
Cleaning the Showerhead
Rotate and detach the shower filter.
Do not detach the Rubber Gasket.)
Clean the shower filter unit (with water).
Remove dirt, such as water deposits in the shower holes
on the shower filter unit, with a toothbrush.
Re-assemble the showerhead.
Drain cap
Drain cap Gasket
Shower Filter unit
Surface to be Cleaned
(front and back)
Rubber Gasket
Do not detach the Rubber Gasket.)
Advertisement
Table of Contents
