Preparations - Takara Belmont RS III Operating Manual

Attach neck cushion on the basin
As shown in the illustrations, check the proper
direction of the neck cushion and fit it to the basin
along the basin edge.
Check the front and back.
When the cushion is mounted in
Caution
the wrong direction, it may contact
the backrest.
Secure the hooks of the neck cushion to the
fixing pins on the inner side of the basin.
The fixing pins are detachable. Be careful
not to lose them.
While shaping the neck cushion along the basin
edge, secure the hooks of the neck cushion to
the fixing pins on the outer side of the basin.
Remove neck cushion
Hold the hooks when removing the neck cushion.
Caution
Applying excessive force to remove the neck cushion may damage the parts.
The neck cushion is consumable supply.Replace it if it is extremely dirty or
Note
the surface has deteriorated. (available at additional cost)

Preparations

Chair Side
Basin Side
Chair Side
Neck Cushion
Basin
Hook
Fixing Pin
Hook