Page 3
Cap cover Prepare the maintenance cover. Attach the maintenance cover fixing bracket to the maintenance cover. (flat washer M4 x 10, cap washer, cap cover) When attaching the maintenance cover fixing bracket, Flat screw fix it at the bottom edge of the oval hole of the maintenance Cap washer cover.
Page 4
(11) Install the maintenance cover (cut) referring to “4. Attach cover (2. Mounting the Maintenance Cover (Page 16))” of the “RS III Installation Instructions”. Then, continue the installation after the process “After installation (Page 24, 25)”. How to adjust faulty temperature regulation Follow to the instructions shown in the "How to adjust faulty temperature...