Advertisement
Quick Links
S A L O N C O N S O L E
Installation Instructions
■ Salon Console
AY-CU*SX1[single tap type]
AY-CU*SX2[double tap type]
The precautions listed here are to ensure that Salon Console can be installed safely, and to prevent any
danger or risk to the person installing Salon Console or those around them. All of these precautions are
important for safety. If Salon Console is installed without adhering to the precautions, Takara Belmont is
not responsible for any damage or risk of accidents to the person who installs or the others around them.
Caution
If Salon Console is installed after ignoring this symbol, "there is the risk of light or moderate injury or physical
damage".
To the installer
• The instructions should be thoroughly read and
understood before installation to ensure that
Salon Console is installed correctly.
• After installation, give this instruction to the
customer.
To the customers
• Customers must not install Salon Console by
themselves.
• Customers must store this instruction in
a safe place so as not to lose them.
* The actual shape of Salon Console and the images
and dimensions listed in this instruction may be
modified and are subject to change without notice.
1
Contents
2017.05
Version 4
2
4
5
5
6
11
Advertisement
Related Manuals for Takara Belmont Salon Console
Summary of Contents for Takara Belmont Salon Console
-
Page 1: Table Of Contents
Caution If Salon Console is installed after ignoring this symbol, "there is the risk of light or moderate injury or physical damage". -
Page 2: Before Installation
Before installation <Dimensions> (unit : mm) Wall fixing position Wall fixing Custom type S size , L size position ■Front view ■side view W.L. ) shows the platform height of 150mm. Neck tip 719 S size 400 24 min. Base L size 500 22.5 F.L. - Page 3 Floor surface Ensure that the material or finishing of the floor surface is waterproof or has a waterproof coating applied. Always ensure that the floor surface is horizontally level. Ensure that the floor surface is smooth and free from bumps around the attachment areas. Installing pipes [Pipe specifications] Rc 1 / 2“...
-
Page 4: Usage Conditions
Use a pressure set between 0.1 to 0.4 MPa (1 to 4 kgf/cm ). If multiple Salon Console are used, ensure that the pressure does not drop below 0.1 MPa (1 kgf/cm Hot water supply, ... -
Page 5: Parts Illustration
Parts Illustration Counter Basin body Side unit left Wall fixing bracket Hot water supply pipe Cold water supply pipe Basin Flexible pipe Platform Side unit right Water stop valve Maintenance door Joint bracket Content of packaging □Flexible pipe …2 □Water stop valve …2 □Basin body floor fixing □Installation manual (this document) …1 screw set... -
Page 6: Installation
Installing location When installing the custom type to the wall, ① keep clearance of at least 30 mm; or ② install KF-SCWS Salon Console Wall Spacer between the unit and the wall (regardless that the wall is in the left corner or the right corner). - Page 7 Drain hose ④ Connect the drain hose with installed drain pipe. The joint must i ) Insert the drain hose with a bearing sleeve to the drain pipe. be airtight VU40 ii) Press the bearing sleeve to the drain pipe and fit it into the drain pipe so that the drain hose and the drain pipe are connected tightly.
- Page 8 * If there is gap between the basin body and the wall, fix the basin body on the wall keeping gap. Wall fixing bracket * You can adjust it because of long hole * When you fix the basin body on the wall with no gap and inclined wall, the basin body will be fixed improperly.
- Page 9 Connecting hot water and water supply pipe ① Install water stop valve to installed hot water / water supply. *Mount the water stop valve as the picture below and it is easy to open and close water with knob. (Knob should be toward outside.) ②...
- Page 10 Setting side unit ③Pushing to the basin body. ① Place the side unit on the platform. ② Press the side unit on the plates. ④Fixing to the basin unit. ③ Push the side unit to the basin body. ④ Fix the side unit to the basin body. Wood screw for ⑤Fixing to the ⑤...
-
Page 11: Memo
MEMO... - Page 12 NOTE TAKARA BELMONT CORPORATION 1-1, 2-Chome, Higashi-shinsaibashi,Chuo-ku,Osaka,Japan TEL . : (06) 6212-3523 FAX . : (06) 6211-5745 Printed in Japan 1E02KGB0...