Table of Contents
Advertisement
Adjust the water temperature while
checking the temperature by hand.
When adjusting the temperature of the water,
reduce the volume of water, point the shower
head away from the customer and check the
temperature by hand. Take care when doing so,
as hot water may come out of the shower head.
Return the temperature control knob
to an appropriate position after using
hot water.
Return the temperature control knob to an
appropriate position after using hot water.
Continuing to use the hot water with the knob in
the hot position may cause burns.
Using other equipment that share the same
water/hot water supply source at the same time
may cause unstable water temperature. If
multiple equipment are to be used, move the
temperature control knob slowly to adjust the
water temperature.
Install on a stable area
Install the main body on a flat, firm floor, and fix it
securely. Failure to follow this instruction may
cause the main body to fall over.
Warning
Do not use hot water (boiling water)
of 60
or higher.
CAUTION
Using hot water of 60
Hot water
damage the parts such as the basin, shower head
and water stop knob.
Disassembly and
repairs/modifications are prohibited.
Disassembly
Prohibited
Disassembly, repairs and modifications must not
be conducted by people other than qualified
repair technicians. Failure to follow this instruction
may cause electrocution, fire or abnormal
operation, leading to injury.
< Basin Tilt Specification>
To adjust the degree of tilt of the basin, see the
section "Adjusting Basin Movement" (p.16).
Do not lean on the basin
Leaning on the basin may cause the basin to fall
over.
Also, coloring dyes on the neck cushion or
basin may stain the user's clothes.
or higher may deform or
Advertisement
Table of Contents
