Takara Belmont RS III Operating Manual page 6

Do not wet the shower head bracket
with water.
Do not wet the shower head bracket with water.
Failure to follow this instruction may cause water
leaks.
Do not wipe with chemicals or apply
heat.
Failure to follow this instruction may cause
deformation or discoloration. If chemicals spill on to
the leather or covers, wipe them dry as soon as
possible.
Avoid direct sunlight or heat from a
stove.
Avoid direct sunlight or heat from a stove. Failure
to follow this instruction may cause discoloration
or degradation of the leather.
Pay attention to maintenance methods.
Be sure to execute daily maintenance according
to the section "Maintenance" on page 16.
In the case of insufficient or improper
maintenance or when periodically replaced parts
are not replaced, the customer shall be
responsible for any harm, damage, or defects
that result; our company shall not assume
responsibility.
Caution
Do not strike the resin (plated) parts
with a hard object.
Do not strike the resin (plated) parts, such as the
Water control knob, with a hard object.
Failure to take this precaution may cause flaws or
cracks on the plated surface and peeling of plating,
thereby resulting in injuries.
Close the Water control knob firmly.
After use or shampooing is complete, close the
water control knob firmly and turn the water off
completely.
Failure to turn the water off completely may
cause water leakage.
After use, wipe water away from all
parts other than the basin.
Leaving the main body with water on it may
cause damage, and make dirt difficult to remove.
Do not move the basin swiftly.
Move the basin gently, paying attention to avoid
hitting people or objects.
Do not practice front shampooing.
This product is intended for side shampooing
and backward shampooing. Practicing the
front shampooing may cause water leaks,
thus wetting the floor.
Do not hit the cover with objects, or
kick the cover.
Failure to follow this instruction may cause
malfunctions or accidents, leading to damage to
the main body.