Care and Maintenance Daily Inspection Daily Inspection Procedure Specifications Standard Period of Use Thank you for purchasing TAKARA BELMONT product. Please read through this manual When Disposing of This Product carefully before installing or using the product to ensure correct use.
Please follow all of the precautions shown here, as they contain important information related to safety. TAKARA BELMONT bears no responsibility for personal injury or harm caused to the user or third parties in the event that the “Safety Precautions”, “Notes for Use” or the “Notes for Use with Synthetic Leather” have not been observed and an accident has occurred.
Have installation or mounting of the equipment Do not sit on the legrest or backrest. Also, do not apply performed by a professional (from TAKARA BELMONT more than the necessary weight to the chair. Doing so may or a TAKARA BELMONT specified representative).
Name of Components (Including Options) • Headrest • Headrest cover Backrest Armrest Towel hanger Manicure bowl Body Manicure holder Reclining lever Legrest Headrest holder Handle Step Heelrest...
Page 5
Name of Components (Including Options) Cape Holder Headrest button Dryer holder Hook Component Materials The casting components of this chair are a handmade one-off product. Different from mass-produced products, the casting components used for appearance of this product are made by hand piece by piece. Some convexoconcave and a hole may remain in the casting surface.
How to Use Adjusting the Headrest Inserting the Headrest Note: The headrest is unnecessary for back shampoo and haircut. Insert the headrest while pressing the headrest button. You cannot insert the headrest unless you depress the headrest button. Headrest button Adjust the headrest to the height of the customer’s head.
How to Use For back shampoo and haircut For back shampoo, pull out the headrest completely. Place the pulled-out headrest in the headrest holder on the side of the body. Headrest Headrest holder Using the Heelrest Depending on the customer’s height and body shape, the heelrest may be used. When the backrest is reclined, rotate the heelrest to support the heel, providing a more comfortable position.
How to Use Reclining/Raising the Backrest The backrest can be unlocked by the reclining lever. The backrest moves only when the reclining lever is tilted back. ● When reclining the backrest Backrest Tilt the reclining lever back. The reclining lever is retained by the gas pressure of the gas Reclining lever cylinder so let the customer lean...
How to Use Using the Cape Holder Using the cape holder provides the following: ● Good ventilation (making space between the customer and cutting cape) ● Easy handling of cut hair 1 Rotate the cape holder forward. Cape holder When storing When using 2 Pull the tip of the cape holder to pinch the cutting cape.
How to Use Using the Dryer Holder The dryer holder is equipped in the rear of the left body. Use the dryer holder as the temporary holder of a hand dryer during operation. Lay the ring of the dryer holder when you use the holder. Body Ring Dryer holder...
Care and Maintenance Take care of the product after use and keep it always clean. Maintenance of each section Resin Upholstery Wipe the urethane upholstery with soft and dry cloth. Wipe the resin with soft and dry cloth. Soft and dry cloth Soft and dry cloth If the stain is heavy If the stain is heavy...
Daily Inspection Procedure Follow the inspection procedure below to ensure safe and long use of the product. Items to be checked every day Item to be inspected How to inspect In case of x as a result of inspection Proper operation of the Inspect that you can raise and The customer may be unable to get on and off equipment...
This is not a warranty period. The “standard period of use” will differ depending on the environment that the customer uses the product in and its frequency of use. For maintenance after the standard period of use has passed, consult your local dealer or TAKARA BELMONT. When Disposing of This Product Properly dispose of this product or its replacement parts in accordance with the rules and regulations at the time of disposal.
Page 16
TAKARA BELMONT CORPORATION 2-1-1, Higashishinsaibashi, Chuo-ku, Osaka, 542-0083, Japan TEL. : (06) 6213-5945 TELEFAX : (06) 6212-3680 1E01UABE Printed in Japan 1710.