Advertisement

Quick Links

Arcadia series
General Safety Instructions
Preparation Before Installation
Parts Lists/Accessory Parts
Installation Procedure
Care and Maintenance
Specification Drawings
• The instructions should be thoroughly read and understood
before installation to ensure that the product is installed
correctly.
• After installation, give these instructions to the customer.
• Customers
• Store these instructions in a safe place so as not to lose
them.
* The actual shape of the product and the images and
dimensions listed in these instructions may be modified and
are subject to change without notice.
Thank you for purchasing this Takara Belmont product.
Using the product before reading the operating instructions
may result in an accident.
This product is an industrial mirror unit designed for barbers
and hair salons. Only use this product for its intended purpose.
Keep this instruction and refer back to them when required.
Version 2
2
4
5
6
8
9
the product.
November 2018

Advertisement

Table of Contents
loading

Summary of Contents for Takara Belmont Arcadia Series

  • Page 1 * The actual shape of the product and the images and dimensions listed in these instructions may be modified and are subject to change without notice. Thank you for purchasing this Takara Belmont product. Using the product before reading the operating instructions may result in an accident.
  • Page 2: General Safety Instructions

    General Safety Instructions Before use Please read through the "General Safety Instructions" to ensure the product is used correctly. This instruction manual contains important information to help avoid personal injury, or property damages to you or your customers. All instructions are important for the safe operation of this product. Definition of markings If this symbol is ignored and the product is used, "there is the risk of death or serious Warning...
  • Page 3 Safety Precautions Warning Do not disassemble, repair, or Hold the mirror frame when wiping modify the mirror. the mirror. Only servicing engineers are permitted to If you do not hold the mirror frame when wiping disassemble or repair the product. Neglecting the mirror, it may cause accidents and injuries.
  • Page 4: Parts List/Accessory Parts

    Parts List/Accessory Parts 1x Mirror 2x Top Plate 1x Desk Unit [Optional Hair-dryer holder(Z-GF-001) ] [Accessory parts] *Two sets are needed for one product.
  • Page 5: Precautions For Use

    Precautions for Use Caution If chemicals come into contact with, Avoid direct sunlight or direct heat wipe it off immediately. from external sources. Neglecting this caution result If chemicals such as hair color adhere, immedi- deformation,discoloration, or deterioration of the ately wipe them off.
  • Page 6: Installation Procedure

    Installation Procedure Insert the Mirror vertically into the groove on the Desk Unit. *Extreme care should be taken. *Minimum two people are required. 2 Fix the Mirror with screws.
  • Page 7 Fix the Top Plate on the Desk Unit. When attaching the Top Plate, be careful not to break the edges of the Top plate or the mirror surfaces. < Attaching the Optional Hair-dryer holder >...
  • Page 8: Care And Maintenance

    Care and Maintenance < How to care > Wipe the surface with a soft and dry cloth. If the stain is hard to remove or oil is spotted, wipe with a damp cloth and warm water with diluted neutral detergent.Then wipe it with dry cloth. Do not use volatile chemical such as thinner, alcohol, gasoline, kerosene, or abrasive, wax, abrasive sponges and scrubbing brushes, etc.
  • Page 9: Specification Drawings

    Specification Drawings Dimensions [mm] 40 [kg] Mass TAKARA BELMONT (UK) LTD. BELMONT HOUSE, ONE ST.ANDREWS WAY, BOW LONDON E3 3PA, UK http:// www.takarahairdressing.co.uk TEL: +44(0)20 7515 0333...

Table of Contents