Table of Contents
Advertisement
Quick Links
■ZEN MIRROR
①Double-sided free-standing frame
②Single-sided free-standing frame
③Single-sided wall mounting frame
④Double-sided free-standing mirror
⑤Single-sided free-standing mirror
⑥Single-sided wall mounting mirror
⑦Top board - White
⑧Top board - Natural brown
⑨Top board - Natural
＜
sided
Single-
free-standing＞
⑦⑧⑨
②
Z E N
/
Install
Operating Manual
＜
Single-sided wall
⑦⑧⑨
③
＜
Double-
free-standing＞
⑤
⑦⑧⑨
①
M I R R O R
mounting＞
⑥
Specifications
sided
Information
④
To the installer
• The instructions should be thoroughly read and understood
before installation to ensure that ZEN Mirror UNIT is installed
correctly.
• After installation, give these instructions to the customer.
To the customers
• Customers must ask professional to install ZEN Mirror UNIT.
• Customers must not install ZEN Mirror UNIT by themselves.
• Customers must store these instructions in a safe place so as
not to lose them.
* The actual shape of ZEN Mirror UNIT and the images and
dimensions listed in these instructions may be modified and
are subject to change without notice.
Thank you for purchasing this Takara Belmont product.
The instructions contained in this booklet should be
thoroughly read and understood before use.
Using this product before reading this operating instructions
may result in an accident.
This product is an industrial mirror unit designed for barbers
and hair salons. Only use this product for its intended purpose
and do not use it for non-hairdressing work.
Keep this instruction and refer back to them when required.
1
Table of Contents
Version 1
February 2018
２
２
４
５
５
５
６
９
９
１２
１３
１３
１３
１４
１６
Advertisement
Table of Contents
Related Manuals for Takara Belmont ZEN MIRROR
Summary of Contents for Takara Belmont ZEN MIRROR
-
Page 1: Table Of Contents
• Customers must store these instructions in a safe place so as ⑦⑧⑨ not to lose them. * The actual shape of ZEN Mirror UNIT and the images and dimensions listed in these instructions may be modified and are subject to change without notice. -
Page 2: Description Of Warning Symbols
These precautions are important for ensuring safety. Adhere to these precautions at all times. Takara Belmont is not responsible for any danger or risk to the person using this product or those around them due to accidents if this product is used without adhering to the "Safety Precautions"and "Precautions for Use"... - Page 3 Safety Precautions Warning Do not disassemble, repair, or Hold the mirror frame when wiping modify the mirror. the mirror. Only customer service staff are permitted to If you do not hold mirror frame when wiping the disassemble or repair the product. Neglecting mirror, it may cause accidents and injuries.
-
Page 4: Precautions For Use
Precautions for Use Caution Avoid direct sunlight or heat from a If chemicals adhere, wipe it off immediately. heater. Neglecting this caution may result in deforma- If chemicals such as hair color adhere, immedi- tion,discoloration, or deterioration of the uphol- ately wipe them off. -
Page 5: Before Using This Product
Before Using This Product ●The JIS standard is applied when manufacturing the mirrors. Due to this, some unevenness within the mirror may occur on the surface of glass. Please note there may be some image distortion due to this process. ●The full mirror is not fixed with the frame, only the middle. -
Page 6: Dimensions
Dimension <Single-sided wall mounting> When installing the product, use the adjuster to make the top board horizontal. The factory default position of the adjuster is the lowest position of the product. The height range of the adjuster is 14 mm, this means the height can be adjusted up to 14 mm. - Page 7 <Single-sided free-standing>...
- Page 8 <Double-sided free-standing>...
-
Page 9: Before Installation
Before installation ・Before installing, refer to the product dimensions on pages 6 to 8 and to decide the best mount- ing position. ・In the case of the wall mounted version, the wall surface requires at least a 12 mm thick concrete panel. - Page 10 <single-sided wall mounting> Attach the lower frame to the wall as shown in the figure below and temporarily fix with 3x screws as shown. Use the adjuster to make the top of the lower frame horizontal. Then tighten the 3x screws firmly. The factory default position of the adjuster is the lowest position of the product.
- Page 11 ＜How to install hairdryer holder＞ frame ①Insert the hairdryer holder all the way into the Fig. 1 frame. ① ②Attach the prepared sets of a screw and nuts to the frame as shown in Figure 1. (2 sets for each dryer holder ) dryer holder ②...
-
Page 12: Daily Maintenance
Daily maintenance Clean the mirror every day at the end of the day. Leaving it unclean may cause unremovable stains or mold to grow. Alcohol Wax with Abrasive ● Do not use volatile chemicals such as Caution thinners, alcohol, benzene, nail polish remove, gasoline or kerosene, abrasive wax, abrasive sponges and so on. -
Page 13: Daily Inspection
Daily inspection ● To ensure safe use of the product, do the following check once a month. Inspection Confirm that there is no shake / tilt of the main body of the product, rattling of the mirror, no floating due to peeling of the adhesive. It may cause the product body to tip over or cause the mirror to fall. - Page 14 Specifications Weight ① Double-sided free-standing frame １５．５㎏ ② Single-sided free-standing frame １４．５㎏ ③ Single-sided wall mounting frame １０．０㎏ ④ Double-sided free-standing mirror ２１．５㎏ １８．５㎏ ⑤ Single-sided free-standing mirror ⑥ Single-sided wall mounting mirror １４．５㎏ ⑦ Top board - white ３．０㎏ ⑧...
-
Page 15: Memo
MEMO... - Page 16 TAKARA BELMONT CORPORATION 1-1, 2-Chome, Higashi-shinsaibashi,Chuo-ku,Osaka,Japan TEL : (06) 6213-5945 FAX : (06) 6212-3680 Printed in Japan 1E06DPA0...