Miele H 7164 BP Operating And Installation Instructions page 87

Problem
The browning of baked
goods is uneven.
The FlexiClip telescopic
runners do not push in
or pull out smoothly.
There is still soiling in
the oven compartment
after a pyrolytic
cleaning programme.
The oven lighting
switches off after a
short time.
Possible cause and remedy
The wrong temperature or shelf level was selected.
 There will always be a slight unevenness in
browning. If browning is very uneven, check
whether the correct temperature and shelf level
were selected.
The material or colour of the baking tin is not suitable
for the oven function.
 When using the
light coloured, shiny tins are not as suitable. Dark,
matte tins are best for baking.
The bearings in the FlexiClip telescopic runners are
not sufficiently lubricated.
 Lubricate the bearings with the special Miele
lubricant.
Only the special Miele lubricant is designed to
withstand the high temperatures in the oven
compartment. Other lubricants may harden and
stick to the FlexiClip telescopic runners when they
are heated. You can obtain the special Miele
lubricant from your Miele dealer or from Miele.
The pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
 Remove the ash using a damp microfibre cloth or a
clean sponge and a solution of hot water and
washing-up liquid.
If there is still coarse soiling left in the oven after the
pyrolytic cleaning programme, you should start the
programme again, selecting a higher level if
necessary.
You have selected the
setting.
 If you want the oven lighting to remain switched on
during the entire cooking programme, select
the Lighting | On
Problem solving guide
Conventional Heat
|
Lighting "On" for 15 seconds
setting.
 function,
87