Software Version; Showroom Programme; Factory Default - Miele H 7164 BP Operating And Installation Instructions

Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele App.
A message will appear in your oven
display if a software update is available.
You can install the update immediately
or postpone this until later. When the
oven is switched on again, you will be
reminded about the update.
Switch RemoteUpdate off if you do not
wish to install updates.
The update can take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the oven off during the
update. Otherwise, the update will be
aborted and will not be installed.
- Some software updates can only be
carried out by a Miele service
technician.

Software version

The software version menu option is for
use by Miele service technicians. You
do not need this information for
domestic use.

Showroom programme

This function enables the oven to be
demonstrated in showrooms without
heating up. Do not activate this setting
for domestic use.
Demo mode
If you switch the oven on whilst it is in
Demo mode, the following message
will appear in the display:
is activated. The appliance will not heat
.
up.
- On
Touch the OK sensor for at least
4 seconds to activate Demo mode.
- Off
Touch the OK sensor for at least
4 seconds to deactivate Demo mode.
You can use the oven as normal.

Factory default

- Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
- Recommended temps
Any recommended temperatures that
have been changed will be reset to
the factory default settings.
Settings
Demo mode
41