Table of Contents
Advertisement
Intelligent dosing system
Your appliance has an intelligent dos-
ing system for liquid detergent and fab-
ric softener.
The optimum quantities of liquid deter-
gent and fabric softener are dispensed
automatically depending on the pro-
gramme and settings. The intelligent
dosing system has been activated at
the factory for all the designated pro-
grammes → Page 24 and can be deac-
tivated for each one individually. In all
other programmes, you can manually
add detergent.
→ "Adding detergent and care
product", Page 36
Filling the dispenser
In order to use intelligent dosing, fill the
dispenser.
Note
¡ Fill the dispenser only with suitable
detergent and care products
→ Page 34.
¡ If you change the liquid detergent or
fabric softener, empty and clean the
dispenser beforehand.
→ "Cleaning the detergent drawer",
Page 48
¡ If you wish to use both dispensers
for liquid detergent, adjust the
→ "Dispenser contents", Page 39.
Requirement:
Pull out the detergent drawer.
1.
Open the dispenser lids.
2.
/
flashes.
Intelligent dosing system en
Pour liquid detergent
3.
softener
into the relevant dis-
pensers.
→ "Detergent drawer", Page 20
Close the dispenser lids.
4.
Note: To prevent the detergent dry-
ing out or drying up, do not leave
the dispenser lids open for a long
period of time.
Push in the detergent drawer.
5.
Adjust the basic dosage
6.
→ Page 40.
Dispenser contents
When it leaves the factory, the dis-
penser is set for fabric softener
ternatively, you can also use this dis-
penser for a second liquid detergent
.
Notes
¡ If you change the content of the dis-
penser, the basic dosage for this
dispenser is reset.
and fabric
. Al-
39
Advertisement
Table of Contents
