Setting A Programme; Adjusting The Programme Settings; Loading Laundry; Adding Detergent And Care Product - Siemens WM16XKH0EU Manual

en Basic operation
It may take a few seconds for the
appliance to switch on.
a The appliance performs an audible
function test in the detergent drawer.
→ "Noise", Page 60
Note: The drum is lit up after the door
is opened and closed and once the
programme has started. The light goes
out automatically.

Setting a programme

Set the programme selector to the
1.
required programme → Page 24.
If necessary, adjust the programme
2.
settings → Page 36.
Adjusting the programme set-
tings
Depending on the programme and pro-
gramme progress, you can adjust or
activate/deactivate the settings.
Note: Overview of all programme set-
tings:
→ "Buttons", Page 29
Requirement: A programme has been
set.
Adjust the programme settings.
▶
Note
¡ The programme settings are not
saved permanently for the pro-
gramme.
36
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.

Loading laundry

Notes
¡ Please read the safety information
→ Page 4 to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of the
maximum load for the relevant pro-
gramme → Page 24.
Requirement: Prepare and sort the
laundry.
→ "Laundry", Page 32
Open the door.
1.
Ensure that the drum is empty.
2.
Separate the laundry and place it in
3.
the drum.
Note: Ensure that there is no laundry
4.
trapped in the door.
Close the door.
Adding detergent and care
product
For programmes in which intelligent
dosing is not possible or desirable, you
can add detergent to the manual dos-
ing compartment.
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.