Table of Contents
Advertisement
en Troubleshooting
Errors
Heavy foam build-up
cannot be actuated.
Noise
Errors
Rushing, hissing noise.
Longer, whirring noise before
the start of the wash cycle or
fabric softening.
Brief whirring noise after
switching on the appliance.
Loud noises during the spin
cycle.
Banging noises, rattling in the
drain pump.
Slurping, rhythmical suction
noise.
60
Cause
Detergent dosage is too high.
Intelligent dosing is not inten-
ded for this programme.
Programme progress does
not allow intelligent dosing.
Cause
Water is flushed under pres-
sure into the detergent
drawer.
Intelligent dosing system dis-
penses detergent or care
products.
Intelligent dosing system car-
ries out a function test.
Appliance is not correctly
aligned.
The appliance feet are not
fixed.
Transit bolts have not been re-
moved.
Foreign bodies have got into
the drain pump.
The drain pump is active, the
detergent solution is pumped
out.
Troubleshooting
Immediate measure: Mix one table-
▶
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the compartment for manual dos-
ing (not for outdoor clothing,
sportswear or items stuffed with
down).
If intelligent dosing is activated, re-
▶
duce the basic dosage → Page 40.
If you dose manually, reduce the
▶
amount of detergent for the next
washing cycle with the same load.
Not a fault – no action required.
▶
No remedial action possible.
Troubleshooting
Not a fault – normal operating noise.
▶
Not a fault – normal operating noise.
▶
Not a fault – normal operating noise.
▶
→ "Aligning the appliance", Page 17
▶
Secure the appliance feet.
▶
→ "Aligning the appliance", Page 17
→ "Removing the transit bolts",
▶
Page 14
→ "Cleaning the drain pump",
▶
Page 50
Not a fault – normal operating noise.
▶
Advertisement
Table of Contents
