Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry; Switching Off The Appli- Ance; Childproof Lock - Siemens WG44G2F1EP User Manual And Installation Instructions

Table of Contents

Advertisement

en Childproof lock
13.10 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the
programme or a pro-
1.
gramme for draining the water.
→ "Programmes", Page 25
Press inicio pausa + carga.
2.
13.11 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.12 Switching off the appli-
ance
Turn the programme selector to
1.
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
32
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
tons for approx. 3 seconds.
a The display shows
a The control elements are locked.
a The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power cut.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
.
tons for approx. 3 seconds.
goes out in the display.
a
15 Intelligent dosing sys-
tem
The optimum quantities of liquid de-
tergent and fabric softener are dis-
pensed automatically depending on
the programme and settings.
15.1 Starting the programme
with intelligent dosing
system
If you do not want to dose liquid de-
tergent and fabric softener manually,
use the intelligent dosing system.
⁠   3s but-
.
⁠   3s but-

Advertisement

Table of Contents
loading

Table of Contents