Malfunctions - Siemens WM16XKH0EU Manual

Errors
⁠ flashes.
All other error codes.

Malfunctions

Errors
The appliance is not working.
The programme does not
start.
Cause
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Start /
⁠ .
Reload
Door is not closed.
Childproof lock is activated.
- Finish in + is activated.
Laundry is caught in the door.
The detergent drawer has not
been pushed in as far as it can
go.
The pump for the intelligent
dosing system is blocked.
Troubleshooting en
Troubleshooting
Close the door.
1.
Press Start / Reload
2.
the programme.
Call the after-sales service.
▶
→ "Customer Service", Page 66
Troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the fuse
▶
box.
Check whether the lighting in your kit-
▶
chen or other appliances are working.
Press Start / Reload
▶
Close the door.
1.
Press Start / Reload
2.
the programme.
→ "Deactivating the childproof lock",
▶
Page 38
Check whether - Finish in +
▶
tivated.
→ "Buttons", Page 29
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start / Reload
4.
the programme.
Push the detergent drawer in as far
▶
as it will go.
Switch off the appliance.
1.
Clean the pump unit.
2.
→ "Cleaning the detergent drawer",
Page 48
If this indicator appears again, call
3.
our after-sales service.
→ "Customer Service", Page 66
⁠ to start
⁠ .
⁠ to start
is ac-
⁠ to start
57