Table of Contents
Advertisement
en Home Connect
Check whether your appliance is
‒
in range of your home network.
Reconnect the appliance to the
‒
WLAN home network (Wi-Fi) with
WPS function.
Connect your appliance to the Home
9.
Connect app → Page 44.
Connecting your appliance to
the Home Connect app
Requirements
¡ The appliance is connected to the
WLAN home network (Wi-Fi).
¡ The Home Connect app is open and
you have logged on.
Set the programme to position 3.
1.
→ "Home Connect settings",
Page 41
a The display shows APP .
Press Start / Reload
2.
a The appliance connects to the
Home Connect app.
Once your appliance is displayed in
3.
the Home Connect app, carry out
the last steps in the Home Connect
app.
a If the display shows , the appliance
is connected to the Home Connect
app.
Activating Wi-Fi on the appli-
ance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in compar-
ison to the values specified in the con-
sumption value table.
Press and hold Remote Start
1.
approx. 3 seconds.
Set the programme to position 4.
2.
→ "Overview of Home Connect set-
tings", Page 41
a The display shows Con .
44
.
for
Press Start / Reload
3.
until the display shows On .
a Wi-Fi is activated.
Note: If Wi-Fi is activated, the appliance
will not switch itself off automatically.
Deactivating Wi-Fi on the ap-
pliance
Press and hold Remote Start
1.
at least three seconds.
Set the programme to position 4.
2.
→ "Overview of Home Connect set-
tings", Page 41
a The display shows Con .
Press Start / Reload
3.
until the display shows OFF .
a Wi-Fi is deactivated.
Note: If Wi-Fi is switched off and your
appliance was previously connected to
your home network, this connection will
be re-established automatically when
Wi-Fi is switched back on.
Resetting the appliance net-
work settings
Press and hold Remote Start
1.
at least 3 seconds.
Set the programme to position 5.
2.
→ "Overview of Home Connect set-
tings", Page 41
a The display shows rES .
Press Start / Reload
3.
a The display shows .
Press Start / Reload
4.
a The network settings are reset.
a If End is shown on the display, the
network settings are reset.
Tip: If you wish to operate your appli-
ance again via the Home Connect app,
you will need to reconnect it to the Wi-
Fi and to the Home Connect app.
repeatedly
for
repeatedly
for
.
.
Advertisement
Table of Contents
