Unloading The Laundry; Switching Off The Appli- Ance; Childproof Lock; Activating The Childproof Lock - Siemens WG44G2F0DN User Manual And Installation Instructions

Table of Contents

Advertisement

en Childproof lock
13.10 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.11 Switching off the appli-
ance
Turn the programme selector to
1.
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.

Childproof lock

14 Childproof lock
Secure your appliance against being
Childproof lock
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
tons for approx. 3 seconds.
The display shows
a
The control elements are locked.
a
The childproof lock remains active
a
even after the appliance has been
switched off and in the event of a
power cut.
32
.
⁠   3s but-
.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
tons for approx. 3 seconds.
So that the programme currently
running is not cancelled, the pro-
gramme selector must be set to
the initial programme.
goes out in the display.
a

Intelligent dosing system

15 Intelligent dosing sys-
tem
The optimum quantities of liquid de-
Intelligent dosing system
tergent and fabric softener are dis-
pensed automatically depending on
the programme and settings.
15.1 Starting the programme
with intelligent dosing
system
If you do not want to dose liquid de-
tergent and fabric softener manually,
use the intelligent dosing system.
This function is available depending
on the selected programme and is
activated automatically.
Note
If you are using the intelligent dosing
system, do not add additional deter-
gent or fabric softener into the com-
partment for manual dosing.
→ "Adding detergent and care
product", Page 31
If you want to dose manually for a set
programme, observe the following
information:
Deactivate the intelligent dosing
¡
system before starting the pro-
gramme. The selected settings are
⁠   3s but-

Advertisement

Table of Contents
loading

Table of Contents