en Installation and connection
Remove the transport struts.
2.
Undo and remove the screws in the
3.
horizontal transport strut using a T20
screwdriver.
Remove the transport strut.
4.
16
Connecting the appliance
Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
Do not immerse the electrical
▶
AquaStop valve in water.
Connect the water inlet hose to a tap
1.
(26.4 mm = 3/4").
Open the water tap carefully and
2.
check that the connection points are
tight.
¾˝
min.
10 mm