Table of Contents
Advertisement
en Troubleshooting
Errors
The programme does not
start.
The door cannot be opened.
The water is not draining.
Water is not flowing in. Deter-
gent is not being dispensed.
58
Cause
is activated.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain hose
is caught or jammed.
Drain pump is blocked.
is activated.
The water outlet hose is con-
nected too high.
You have not pressed Start /
.
Reload
The filter in the water inflow is
blocked.
The tap is turned off.
Troubleshooting
Note: You can start the washing pro-
gramme if you deactivate the intelligent
dosing system and dose manually.
→ "Buttons", Page 29
Continue the programme by selecting
▶
Spin or Empty
Start / Reload
→ "Resuming the programme when
the programme status is Rinse Hold",
Page 37
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 37
Start the Empty
▶
Open the door using the emergency
▶
release.
→ "Emergency release", Page 64
Clean the drain pipe and the water
▶
outlet hose.
Ensure that the drain pipe and water
▶
drain hose are not kinked or trapped.
→ "Cleaning the drain pump",
▶
Page 50
Continue the programme by selecting
▶
Spin or Empty
Start / Reload
→ "Resuming the programme when
the programme status is Rinse Hold",
Page 37
Install the water outlet hose at a max-
▶
imum height of 1 metre.
→ "Technical specifications",
Page 69
Press Start / Reload
▶
Clean the water inflow filter
▶
→ Page 53.
Turn on the tap.
▶
and pressing
.
programme.
and pressing
.
.
Advertisement
Table of Contents
