Table of Contents
Advertisement
If the display shows Err , the appli-
4.
ance is not connected to the home
network.
Check whether your appliance is
‒
in range of your home network.
Reconnect the appliance to the
‒
WLAN home network (Wi-Fi) with
WPS function.
Connect your appliance to the Home
5.
Connect app. → Page 44
Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network (Wi-
Fi) manually. The appliance quickly
sets up its own Wi-Fi network. You can
connect a mobile device to the WLAN
network and transfer the network in-
formation for the WLAN home network
(Wi-Fi) to your appliance.
Requirement: The Home Connect app
is open and you have logged on.
Press and hold Remote Start
1.
at least 3 seconds.
a The display shows Aut.
Set the programme to position 2.
2.
→ "Overview of Home Connect set-
tings", Page 41
a The display shows SAP .
Press Start / Reload
3.
flashes in the display.
a
a The appliance now sets up its own
Wi-Fi network with the name (SSID)
HomeConnect.
for
.
Call up the Wi-Fi settings on the mo-
4.
bile device.
Connect the mobile device to the
Home Connect Wi-Fi network and
enter the password (key) HomeCon-
nect.
a Your mobile device now connects to
the appliance. The connection pro-
cess may take up to 60 seconds.
Open the Home Connect app on
5.
your mobile device and carry out the
steps in the app.
In the Home Connect app, enter the
6.
network name (SSID) and password
(key) for your home network.
Carry out the steps in the
7.
Home Connect app to connect the
appliance.
a If the display shows and
permanently, the appliance is con-
nected to the home network.
If the display shows Err , the appli-
8.
ance is not connected to the home
network.
Home Connect en
lights up
43
Advertisement
Table of Contents
