Lexmark MB3442adw User Manual page 23

Set up, install, and configure
Using the fax setup wizard in the printer
Notes:
•
The setup wizard is available only if no device‑based fax, such as analog, etherFAX, or Fax over IP (FoIP),
is configured.
•
Before using the wizard, make sure that the printer firmware is updated. For more information, see
"Updating firmware" on page
1
From the home screen, touch Fax.
2
Touch Set up now.
3
Type the fax name, and then touch Next.
4
Enter the fax number and then touch Done.
Using the Settings menu in the printer
1
From the home screen, touch Settings > Fax > Fax Setup > General Fax settings.
2
Configure the settings.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Fax > Fax Setup > General Fax Settings.
3
Configure the settings.
4
Apply the changes.
44.
23