Lexmark MB3442adw User Manual page 168

Troubleshoot a problem
Action
Step 1
a
Check if the printer is using a genuine and supported Lexmark
toner cartridge.
Note: If the toner cartridge is not supported, then install a
supported one.
b
Print the document.
Are text or images cut off?
Step 2
a
Remove, and then insert the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit
to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs.
b
Print the document.
Are text or images cut off?
Step 3
a
Replace the imaging unit.
b
Print the document.
Are text or images cut off?
Toner easily rubs off
Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to
Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press
navigate through the settings.
Yes No
Go to step 2. The problem is
solved.
Go to step 3. The problem is
solved.
Contact customer The problem is
support. solved.
168
to