Lexmark MB3442adw User Manual page 112

Use printer menus
Menu item
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Compatibility
802.11b/g/n (2.4GHz)
802.11a/b/g/n/ac (2.4GHz/5GHz)*
802.11a/n/ac (5GHz)
Wireless Security Mode
Disabled*
WEP
WPA2/WPA-Personal
WPA2-Personal
802.1x - RADIUS
WEP Authentication Mode
Auto*
Open
Shared
Set WEP Key
WPA2-Personal
AES*
Set PSK
WPA2/WPA‑Personal
AES*
802.1x Encryption Mode
WPA+
WPA2*
IPv4
Enable DHCP
On*
Off
Description
Establish a wireless network and enable network security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
Specify the wireless standard for the wireless network.
Set the type of security for connecting the printer to wireless devices.
Set the type of Wireless Encryption Protocol (WEP) used by the
printer.
Note: This menu item appears only if Wireless Security Mode is set
to WEP.
Specify a WEP password for secure wireless connection.
Note: This menu item appears only if Wireless Security Mode is set
to WEP.
Enable wireless security through WPA2.
Note: This menu item appears only if Wireless Security Mode is set
to WPA2-Personal.
Set the password for secure wireless connection.
Note: This menu item appears only if Wireless Security Mode is set
to WPA2/WPA-Personal or WPA2‑Personal.
Enable wireless security through WPA2/WPA.
Note: This menu item appears only if Wireless Security Mode is set
to WPA2/WPA-Personal.
Enable wireless security through 802.1x standard.
Note: This menu item appears only if Wireless Security Mode is set
to 802.1x - Radius.
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that allows a server to distribute
IP addressing and configuration information dynamically to clients.
112