Ashtech Evaluate; Setting Up The Ashtech Evaluate Application - Intermec 6640 Technical Reference

Desktop Applications
3. Change Bits per second to "4800," ensure the other settings are set to 8
If contact is successful with the Ashtech G8 GPS radio, the radio returns an af-
firmative response. Messages can then be sent to the radio and the radio will
respond to these commands with various pieces of information.
Use the online help for more information about using the HyperTerminal ap-
plication.

Ashtech Evaluate

The Ashtech Evaluate applications are in the "C:\Utilities\Ashtech" folder.

Setting Up the Ashtech Evaluate Application

The Ashtech Evaluate application was set up when the component was installed
onto the computer from the toolkit. If, for some reason, the Ashtech Evaluate
application needs to be set up again, double-click the Setup desktop icon within
the "C:\Utilities\Ashtech" folder to install the Ashtech Evaluate application and
follow the steps starting on page 4-9.
5-28 6640/6650 Windows 2000 Technical Reference
data bits, no parity, and 1 stop bit. Click OK to return to the
HyperTerminal application.
SECTION 5