Camera Connection - Brickcom OB-302Ae V5 Series Hardware User Manual

2. Wall Installation
Drill three holes on the wall and hammer the supplied plastic anchors into
the three holes. Then, use a screwdriver and the supplied screws to screw
the camera onto the wall.

3. Camera Connection

The camera is DC12V and PoE compliant, so there are two options for
powering on the camera. The camera can either be connected to a PoE
switch or a non-PoE switch.
a. Powering on Camera with PoE Switch:
Use an Ethernet cable to connect the camera to the PoE switch.
14