Table of Contents
Advertisement
The Reset Button can be used to reboot the camera or restore it to factory default
settings. If the camera experiences a problem, rebooting the camera may correct the
problem. If the problem remains, please restore the camera to factory default settings
and reinstall the software.
To Reboot
Press and hold the Reset Button for one second using a paper clip or thin object. Wait
for the camera to reboot.
To Restore
Press and hold the Reset Button for ten seconds until the LED light turns off. When
successfully restored, the LED will be blue during normal operation.
NOTE - By restoring the camera, all settings will be restored to the factory
default settings.
Micro-SD/SDHCSDXC Card Capacity
The network camera is compatible with Micro-SD/SDHC/SDXC (Maximum 64GB) cards.
(*) These are optional features. Please refer to the datasheet for the full list of
optional features that are available for this product.
*
11
Advertisement
Table of Contents
Need help?
Do you have a question about the OB-302Ae V5 Series and is the answer not in the manual?
Questions and answers