Table of Contents
Advertisement
E. If the camera supports the EasyLinkTM function, the following page will
be displayed. Otherwise, this page will not be shown. *If desired, click
<Skip> to skip this setting.
EasyLinkTM is a unique Brickcom function which allows users to assign a
unique EasyLink name to their network camera's IP address. There is no
need to configure the router to open up ports or remember
hard-to-memorize
IP
addresses.
Users
can
log
onto
[uniqueEasyLinkname].mybrickcom.com to view the camera's web GUI and
live view.
a. Enter a unique EasyLink name whose length must be between 5-32
characters.
b. When finished, click the arrow button to continue.
30
Advertisement
Table of Contents
Need help?
Do you have a question about the OB-302Ae V5 Series and is the answer not in the manual?
Questions and answers