General Information - Mecmesin MultiTest-d Operating Manual

General
Information
MultiTest 0.5-d
MultiTest 1-d
MultiTest 2.5-d
page 11
Mecmesin are proud to introduce the MultiTest-d range of
motorised test stands. MultiTest-d stands provide a versatile
and accurate method of applying tensile and compressive
forces at an affordable price. Complemented by a Mecmesin
loadcell or force gauge (as illustrated in the photograph on the
front cover), together with special fixtures and accessories, it
constitutes a force measurement system suitable for accurately
reproducing the testing of a wide range of products.
Across the globe, quality control and product design centres,
as well as research laboratories, rely upon MultiTest-d stands
for precision force testing.
The MultiTest 0.5-d is a 0.5kN (110lbf) test stand with a
sizeable column height to accommodate samples up to
1230mm (48.4")* in length and facilitate extensive elongation
of smaller samples.
The MultiTest 1-d is a 1kN (220lbf) test stand, also ideal for
testing high elongated samples with lengths up to 1030mm
(40.6")*
The MultiTest 2.5-d, while retaining all the operational features
of the MultiTest 1-d is a more compact test stand with a
higher load rating of 2.5kN (550lbf).
The higher force capacity makes the MultiTest 2.5-d the ideal
choice for quality control applications requiring
mid-range tension and compression testing on samples with
lengths up to 530mm (20.9")*
*Subject to grips being used