Keys; Control Panel - Thermo Scientific SL40 Instruction Manual

3

Control Panel

Keys

Keys
The keys allow user intervention for controlling the operating mode as follows:
key
Control Panel
The control panel contains the keys and displays of the centrifuge (only the power switch is located
on the back of the device). All parameters can be selected and changed during operation.
3-2 SL40 / 40R
display contents
Normal start of the centrifuge
Start
End run manually
Stop
Release (possible only when device is switched
on). Release during power failure: see
Open lid
"Mechanical emergency lid release"
page
By pressing the "PULSE" key the centrifuge starts
immediately and accelerates up to the end speed.
Pulse
Releasing the key initiates a stopping process at
the highest braking curves.
Use the arrow buttons in order to modify the
Change value
displayed value.
Press the snow symbol key for prewarming or
Snow symbol
precooling the centrifuge.
Use the CHANGE key to change the display
Changing the
mode. (Speed / RCF-value)
display mode
7-2)
on
Thermo Scientific