Aerosol-Tight Rotors; Switching The Centrifuge Off - Thermo Scientific SL40 Instruction Manual

Aerosol-tight Rotors

When using a lid sealed against aerosols, you can only remove the rotor with the rotor lid closed! This
is for your personal safety and to ensure the integrity of the samples.
Figure 4-2. AutoLock

Switching the Centrifuge off

1. To turn off the centrifuge put the mains switch to "0".
Thermo Scientific
CAUTION Rotors supplied with a lid for aerosol-tight applications come with a mandril,
which belongs to the AutoLock
prevent it from being damaged.
TM
-lid for aerosol-tight rotors
WARNING Mind the AutoLock
TM
. Be sure not to place the lid onto this mandril to
TM
-mandril inside the lid. Do not touch.
4
Operation
Aerosol-tight Rotors
SL40 / 40R 4-9