Workout Selection - Casall EB300 Manual

OPERATION:
POWER ON
Plug in the power supply, the computer will power on and display all segments on LCD for 2
seconds (Drawing 1).
Drawing 1

WORKOUT SELECTION

Use UP or DOWN (Encoder) to select to workout manually (Drawing2)Program (Drawing 3)
User Program (Drawing 4) H.R.C. (Drawing 5)  Watt(Drawing 6).
Drawing 2
Drawing 4
Drawing 6
Manual Mode
Press START in main menu to start workout in manual mode.
1. Use UP or DOWN (Encoder)
/ ENTER to get into.
2. Use UP or DOWN (Encoder)
CALORIES (Drawing 9), PULSE (Drawing 10) and press
3. Press START/STOP to start workout. Use
the load level display in WATT window is not adjusted for more than 3s, it will switch to
display WATT (Drawing 11).
4. Press START/STOP to pause your workout. Press RESET to go back to the main menu.
Drawing 7
to select workout program, choose MANUAL and press
to preset TIME (Drawing 7), DISTANCE (Drawing 8),
UP or DOWN (Encoder)
Drawing 3
Drawing 5
MODE / ENTER
to adjust the load level. If
Drawing 8
MODE
to confirm.