Programming - AES global Cellcom Prime 5AB Manual

Now that you have either entered a new client, or selected an existing client from the client list,
you are now ready to begin programming.
Note: SMS string= *20#
P a g e | 9

Programming

Step 1: Check Reception
Go to MORE>INFO & press the reception check button.
On Android the app will automatically send a SMS string (*20#)
to the intercom.
On iphone, users will be taken to their SMS screen to
confirm before sending the string. The intercom should then
reply with a signal level between 1 and 31.
1-12
Poor
For good performance, signal level on 2G should be at least 13.
On 3G signal it should be no less than 10.
TIP: If signal is lower than recommended, then take IMMEDIATE
action. Change network if possible, or use an optional high gain
antenna. Check power cable is within recommended
specification. (Poor power cable can lower reception).
SMS message sent to intercom.
SMS reply to your phone.
13-20 21-31
Good
Medium