Table of Contents
Advertisement
Operation
If you attempt to register a fifth black key, the display will
show the "Can't register any more" message. This means
that the registration can not be done.
Registering a black key for the machine
Register a black key only under the following conditions:
Make sure that there are no persons within the excavator's working area. It is essential to warn
persons in the vicinity of the excavator by briefly honking the horn.
Make sure that all operational controls are in neutral position.
Starting the excavator is only allowed when the operator is sitting on the operator's seat.
Do not allow the engine to run indoors, unless the room is equipped with an exhaust gas extrac-
tion system or otherwise well ventilated. The exhaust gas contains carbon monoxide, a colour-
less, odourless, and lethal gas.
1.
Insert red key into the starter switch.
Do not turn the key at this point. If the key is in the
RUN position, turn it back to the STOP position.
2.
Press the display selector switch.
3.
The display shows the "Register mode - pull out red key"
message.
4.
Pull out the red key.
5.
The display shows the "Register mode - insert key" message.
6.
Insert black key into the starter switch.
79
Advertisement
Table of Contents
Troubleshooting
