Servicing Maintenance Chart: 50 To 500 Hours Of Operation - Kubota U17-3a Operating Instructions Manual

Hide thumbs Also See for U17-3a:

Table of Contents

Maintenance

Servicing maintenance chart: 50 to 500 hours of operation

Servicing by skilled personnel or KUBOTA dealer

Servicing

Check/adjust V-belt tension

Check coolant hoses and

clamps

Grease pilot valve linkage

Replace coolant hoses and

clamps

Change engine oil and oil

filter

Replace the fuel filter

Change return filter for the

hydraulic oil tank

Replace the drive unit oil

Change hydraulic oil and

suction filter

Replace the in-line filter

Replace the air filter elements

Change running gear and

track roller oil

Check alternator and starter

motor

Check electric cables and

connections

Safety inspection

Replace the coolant and rinse

the cooling system

Change hydraulic hoses

The servicing identified with ● must be carried out after the specified hours of operation after initial operation have

been reached.

1.) Under dusty conditions the air filter must be cleaned more frequently or replaced.

2.) When using a breaker over 20% → every 800 h.

When using a breaker over 40% → every 400 h.

When using a breaker over 60% → every 300 h.

When using a breaker over 80% → every 200 h.

3.) When using a breaker up to 50% → every 200 h.

When using a breaker over 50% → every 100 h.

Replace the return filter approximately 250 hours after the initial operation.

4.) Earlier if necessary.

Elapsed hours of operation *

100

150

200