Description Of The Components Of The Right Control Console; Displays And Indicators - Description - Kubota U17-3a Operating Instructions Manual

Description of the components of the right control console

1. Right control lever
The functions of the right control lever are described in the "Controls" section (page 37).
2. Horn switch
Depressing the horn switch activates the horn.
3. Wrist rest
The wrist rest allows fatigue-free operation of the control lever.
4. Travel speed button
The travel speed button switches the HI speed mode on and off.
5. Dozer control lever
The functions of the dozer control lever are described in the "Controls" section (page 37).
6. Throttle lever
The operator can use this lever to set the engine RPM to any desired speed.
7. Starter switch
The starter switch serves as the master switch for the entire machine and as switch for pre-glowing and
starting the engine.
8. Travel speed indicator
The travel speed indicator lights up when the travel speed mode is activated.
9. Rotary beacon button
The rotary beacon is switched on with this button.
10. Display
The functions of the display are described in the "Displays and indicators – description" section (page 35).
Displays and indicators – description
1. Warning light
The warning light flashes yellow or red when a fault occurs.
Operations must cease immediately when the warning light flashes red.
2. Display
Depending on the operating situation, the display shows the fuel level, engine temperature, the hours of
operation, speed and various indicator symbols. The chapter for the operation gives a detailed description
of the individual displays based on specific operating situations.
3. Display selector switch
Toggles between two different types of display.
4. Working light button
Switches the working lights on and off.
36
Assembly and functions