Baking Chamber Light Switch; Switch For Suction Hood; Temperature Control; Baking Chamber Temperature Display - ZANOLLI Citizen 6/MC Instructions For Installation, Use And Maintenance Manual

______________________________________6. WORKING ELECTROMECHANICAL VERSION
chamber heating elements turn on according to the set temperature and
power.
6.2.2.

Baking chamber light switch

By setting switch on ON, the switch and the chamber light turn on.
6.2.3.

Switch for suction hood

The switch for suction hood control
is placed on the side part of the control
panel, on the upper side (Pos.1 of Fig. 6.2).
Push this switch on position "I" to start one of the
two motors of the suction hood.
Pos. 1
Push this switch on position "II" to start both
motors of the suction hood.
Push this switch on position 0 to stop it.
Fig.6.2

6.2.4.Temperature control

Baking chamber temperature
display
In the normal operation mode, this display shows the cooking chamber
temperature in °C.
In the temperature programming mode, this display shows the programmed
temperature. This displays is also used to display some failures. (6.3.).
6.2.5.

Set button,

Push-button of ESC.

Press two times this button to select the temperature programming mode.
WARNING ! do not keep this button pressed because this might alter
the thermostat internal parameters and cause possible unpredictable failures.
In this operation mode, the display shows the programmed
temperature, which can be changed using the and buttons. If no
buttons are pressed for more than 3 seconds, the thermostat automatically
returns to the normal operation mode.
See chapter 3 for the range of temperatures that can be selected.
To press two times this push-button in order to exit from the way
programming temperature.
______________________________________________________________________________
17 CITIZEN 6 - 9/MC