And Buttons; Out Display; Power Regulators - ZANOLLI Citizen 6/MC Instructions For Installation, Use And Maintenance Manual

______________________________________6. WORKING ELECTROMECHANICAL VERSION
6.2.6. and
By pressing and releasing these buttons once, the set temperature increases
or decreases by one unit. By keeping them pressed, the set temperature
increases or decreases progressively, slowly at first and then faster.
6.2.7.

OUT display

The display turns on every time the baking chamber temperature is
below the set temperature. It turns off when the cooking chamber
temperature reaches the set temperature and goes on again when the baking
chamber temperature goes 1° C below the set temperature.
When the
according to their power settings.

6.2.8.Power regulators

Each baking chamber has two power regulators, one connected to the oven
roof heating elements, and the other one to the bedplate heating elements.
These regulators ensure an even distribution of the heat inside the baking
chamber so as to obtain an even cooking.
Each power regulator controls the power of its own heating element,
regulating the start up time of the heating element within a range of 30
seconds.
If the power regulator is set on 1, its heating element will be on for 3 seconds
and off for 27 seconds ( provided the
placed on 5, its heating element is on for 15 seconds and off for 15 seconds.
When the power regulator is placed on 10, its heating element is always on
(provided the
______________________________________________________________________________
18
buttons
display is on, the baking chamber heating elements turn on
display is on).
CITIZEN 6 - 9/MC
is on). If the power regulator is