Use; Preparation For Use; Ignition Of The Control Panel; Settings - ZANOLLI Citizen 6/MC Instructions For Installation, Use And Maintenance Manual

_________________________________________________________________________8. USE

8.USE

8.1.Preparation for use

If the equipment has just been installed or has not been used for a
number of days, before using it for food products, it is necessary to clean it
thoroughly in accordance with the indications in chapter 9 to remove residual
factory dirt, accumulations of dust or any other substances which could
contaminate food products.

8.2.Ignition of the control panel

For the electromechanical version: turn the light switch on , the
control panel turns on and you can make all settings while the baking
chamber is still off.
For the electronic version: turn the main ON/OFF light switch on and
press the key button . The control panel turns on and you can make all

settings.

ATTENTION: by pressing the key you start the baking cycle!
8.3.Settings
For the electromechanical version: set the required temperature by means of
the keys , and (see 6.2.5. and 6.2.6).
Set the power of the heating elements of the oven top and bottom .
For the electronic version: set the required temperature and the power of the
heating elements (see 7.3.1 and 7.3.2).
______________________________________________________________________________
24 CITIZEN 6 - 9/MC