Main On/Off Light Switch; Key On/Off - ZANOLLI Citizen 6/MC Instructions For Installation, Use And Maintenance Manual

_______________________________________________7. WORKING ELECTRONIC VERSION
Press again the key
shown in fixed mode and the display
heating element starts to blink.
Use the keys
display.
Press the key
displayed in fixed mode and the programming phase is ended.
Remark: Each unit shown by the two displays
corresponds to the 10 seconds during which the relevant heating element
group is on. For the remaining units the heating element will be off. The total
duration of the cycle is 90 seconds.
The digit relevant to the ignition time of the two heating elements is from 0 to
9 and can be changed at any time by the user, even during the baking cycle.
The heating elements of the oven top turn on during the cycle first phase,
while the ones of the bottom turn on during the second phase.
Parameter
OVEN TOP
0
1
2
3
4
5
6
7
8
9
7.3.3.

Main ON/OFF light switch

When this switch is on 0, the electronic card is not powered and all indicators
of the control panel are off. When the switch is on 1, the card is powered and
the oven is in an inactivity state. The writing "OFF" appears On the display
of the control panel. You can now provide for setting the
temperature, the power, etc. (see chapt.7.3.1 and 7.3.2)
7.3.4.Key on/off
By pressing the key on/off
the setting previously made.
______________________________________________________________________________
22
to enter the datum into memory. The parameter is
and until you read the desired parameter on the
to enter the datum into memory. The parameter is
Parameter OVEN
BOTTOM
0
1
2
3
4
5
6
7
8
9
you can start the baking cycle according to
CITIZEN 6 - 9/MC
relating to the oven bottom
Heating element
ON
Never active
10 seconds
20 seconds
30 seconds
40 seconds
50 seconds
60 seconds
70 seconds
80 seconds
Always active
and
Heating element
OFF
Never active
80 seconds
70 seconds
60 seconds
50 seconds
40 seconds
30 seconds
20 seconds
10 seconds
Always active
,