CARDIOSTRONG FX80 Assembly And Operating Instructions Manual page 20

Step 7: Assembly of the handlebars
NOTICE
L
For better performance, apply some lubricant to the axle on the upright post.
1. Place the cover (98) on the axle on the upright post (2).
2. Mount the lower handlebar (5) to the axle on the upright post (2) with one Allen screw (35) and
one washer (49) and tighten the screws with the tool.
3. Mount the lower handlebar (5) to the swing arm (11) with one Allen screw (33), two connection
cases (62), one washer (50) and one self-locking nut (58) and tighten the screw with the tool.
4. Mount the cover (97) to the lower part of the handlebar (5) with two screws (46).
5. Slide the cover (102) onto the upper handlebar (14) and connect the upper handlebar (14) with
the lower handlebar (5) with three Allen screws (36) and three self-locking nuts (58).
6. Tighten the screws with the tool.
7. Repeat 1.–6. for the other side.
97
35
46
5
33
62
20
14
102
98
58
58
2
36
49
33
11
Coated lubricate oil
FX80