CARDIOSTRONG FX80 Assembly And Operating Instructions Manual page 16

Step 2: Assembly of the handlebar with hand pulse sensors
1. Guide the hand pulse cables (59) through the openings on the upright post (2).
2. Mount the handlebar (7) to the upright post (2) with four Allen screws (30) and four washers (50).
3. Mount the handlebar cover (104) to the handlebar (7) with two screws (83).
4. Tighten the screws with the tool.
Step 3: Assembly of the console and the water holder
1. Connect the cables of the upright
post (2) with the cables of the console
(87), see A.
2. Mount the console (87) to the uprigth
post (2) with four screws (118).
3. Mount the water holder (119) to the
upright post (2) with two screws (120).
4. Tighten the screws with the tool.
16
2
59
7
50
30
104
83
87
A
118
2
119
120
FX80