Table of Contents
Advertisement
Possible Malfunctions
6. When the solution boils, rotate the temperature controller counter-clockwise,
until the heating-up indicator light (blue) goes off (section 'Preparation' /
'Interval Boiling').
7. Leave the agent for some time for it to act.
8. Then, drain the solution through the dispensing tap to a suitable container, so
that the dispensing tap is also descaled (section 'Appliance operation' /
'Dispensing Tap Operation').
9. To rinse the water tank, use two full water tanks of fresh water.
Now, the appliance is descaled and ready for further operation.
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
Malfunction
Appliance does
not work
191005
Cause
The plug is incorrectly
connected to the mains
socket
Damaged mains socket
No power supply from the
mains
ON/OFF switch has not been
operated
Temperature controller has
not been operated
Solution
Connect the plug correctly
Plug the appliance into
another socket
Check the house connection
fuse
Press the ON/OFF switch;
the operation indicator light
(blue) in the switch lights up
Rotate the thermostatic
controller to the limit,
clockwise
EN
21 / 24
Advertisement
Table of Contents
