Table of Contents
Advertisement
o After removing lime rinse the container with clean water.
o After cleaning you should apply a soft, dry cloth in order to wipe dry and polish the
surface.
CAUTION!
Complaints will not be accepted if the device is not decalcified regularly as
described in the instruction manual.
Such complaints are no cases of warranty!
6.3 Safety instructions for maintenance
o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
7. Possible Malfunctions
Problem
Control lamp do not flash
up after switching into
temperature stage
Device does not work
If you cannot eliminate the malfunction:
Disconnect the device from the power supply (pull the plug!),
-
-
Do not open the housing,
Notify customer service or contact a dealer.
-
Please check:
• If power plug is plugged in properly
• If the socket works properly ((main) fuse and/or
residual current circuit breaker are OK)
• The protection against overheating will be
activated was released because of overheating
- 27 -
Advertisement
Table of Contents
