Possible Malfunctions - Bartscher 191004 Original Instruction Manual

Possible Malfunctions

7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Problem
The appliance does
not work.
The appliance is
switched on, but
the heating up
indicator light is
not lit.
The appliance
switches off.
When malfunc tion c annot be removed:
- do not open the housi ng;
- infor m the ser vic e c ompany or c ontac t the s upplier and pr ovide the foll owing data:
type of malfunction;
When malfunction cannot be removed:
– do not open the housing;
– inform the service company or contact the supplier and provide the following
data:
– type of malfunction;
– code number and serial number (to read from the rating plate of the
device).
191004
Cause
The plug is not connected
to the mains socket.
The house connection
fuse tripped.
Damaged heating up
indicator light.
Damaged heater
The overheating
protection was triggered:
too little water or no water
in the water tank.
Solution
Connect the plug.
Disconnect the appliance
from mains supply, reset the
fuse and re-connect the
appliance.
Contact the supplier
Contact the supplier
Leave the appliance to cool
down, and them fill it with
fresh potable water.
EN
19 / 22