Installing A Toolboard And Handle; Fig. 28 Cp37Xx-1600_Handle And Toolboard; Table 22 Ordering Options For Handle And Toolboard - Beckhoff CP37-1600 Series Manual

Commissioning
4.2.3

Installing a toolboard and handle

You have the option of retrofitting mechanical extensions such as a handle or a toolboard to your Panel PC.
The following ordering options are available:
Table 22: Ordering options for handle and toolboard
Order identifier
C9900-M361
C9900-M419
The handle (1) and the toolboard (2) are mounted on the underside of the Panel PC using three M5 screws.
Three M5 threaded holes are provided for this purpose (see Fig. 28).
1
Fig. 28: CP37xx-1600_handle and toolboard
32
Execution
Handle, length = 386 mm, anodized aluminum, mounted on the underside of a
Control Panel or Panel PC CP3xxx, can only be ordered together with the
Control Panel or Panel PC.
Toolboard for keyboard or tools, mounted on the underside of a Control Panel
or Panel PC CP3xxx, without integrated IP 65 USB socket at the rear, can only
be ordered together with the Control Panel or Panel PC.
Version: 1.1
2
CP37xx-1600