Replacing The Battery; Fig. 37 Cp37Xx-1600_Access To Battery And Storage Medium - Beckhoff CP37-1600 Series Manual

Maintenance
• grounded and electrostatically dissipating equipment and operating materials (e.g. tools) within the
ESD protection zone.
If it is not possible to create an ESD protection zone, you can still protect the device against ESD damage.
For example, the following measures can be used:
• Use conductive mats connected to the ground potential as underlays.
• Dissipate possible charges from your own body by touching grounded metal (e.g. control cabinet door).
• Wear a wrist grounding strap.
• Only remove new electronic components from the ESD packaging (tinted plastic bag) after putting on
the wrist grounding strap.
• Do not walk around with electronic components in your hand if they are not in ESD packaging.
Access to battery and storage medium
To be able to replace the battery and the storage medium, you must first gain access to these device
components. You can access the battery and the storage medium via the cover flap at the side. To do this,
loosen the two screws (M3x8 countersunk Torx) and remove the cover flap (see Fig. 37).
Fig. 37: CP37xx-1600_access to battery and storage medium
You now have access to the battery (1) and the storage medium (2).
7.2.1

Replacing the battery

Incorrect battery type
Inserting the wrong type of battery can damage the device.
• Only replace the battery with a replacement battery from Beckhoff Service.
• When replacing the battery, make sure that the polarity is correct.
Battery damage
Incorrect handling of the motherboard battery can damage it.
• Do not recharge the battery.
• Do not throw the battery on the fire.
• Do not open the battery.
• Protect the battery against direct sunlight and moisture.
46
1
2
NOTE
NOTE
Version: 1.1 CP37xx-1600