Advertisement
How to use
1
Insert the
AC 220 V
power plug
Standby mode
• If the oven is left idle for more than 1 minute, the screen will turn power
save mode automatically and display nothing.
• In power save mode, the
screen returns to standby mode.
• In power save mode, only the
2
Select functions
In standby mode, press the
button, then press the
Forexample,selecttheupperandlowertubes(
•
indicates flashing.
3
Set Temperature
Press the
button, then press the
button
to set the upper tube temperature according to the
food property and personal preference.
• Whensettingthetemperature,thetemperatureincreasesordecreasesinincrementsof10°C.
• Thetemperatureforfermentationisfixedandcannotbeadjusted.
• For heating mode, if you select the upper tube, lower tube or turnspit, the temperature can be set
from 70 °C to 180 °C. If you select upper and lower tubes, the temperature can be set from 70 °C
to 230 °C.
• After setting the temperature, the oven will automatically enter power save mode if it is not
operated for more than 1 minutes.
* If you do not need to preheat the oven, please skip to Step 5 after finishing Step 3.
EN12
Manual function
button light on, press
button and the
button can be operated.
button to select the desired function.
flashes).
After setting the upper tube temperature,
press the
button again, then press the
button to set the lower tube temperature.
4
Preheating
(No preheating is available for turnspit function and fermentation function.)
• After setting the temperature, press the
• When the temperature reaches the preset degree, the buzzer will sound "beep-
beep-beep" indicating that preheating is completed.
• During or after the selection, before pressing the
settings.
• T heuppertubetemperaturedisplayshowsthemaximumtemperaturesetattheUpperand
Lower Tube Temperature, which will be used as a reference for preheating.
• T hepreheatingisdonebyupperandlowertubes.Whentheinnertemperatureoftheoven
reaches 100 °C or above, the lower tube temperature display shows the current inner tem-
perature, but it does not show temperature if the inner temperature is below 100 °C.
• After completion of preheating, the oven automatically enters power save mode if it is not
operated for more than 5 minutes.
5
Time setting
Afterthecompletionofpreheating,theDisplayWindowdisplaysdefaulttime(60minutes)
automatically. You can press the
button to set the time according to the food nature and
personal preference.
If you do not need preheating, press the
according to the food nature and personal preference.
• W hensettingthetime,thetimerincreasesordecreasesinincrementsof1minute.Pressand
hold the
button for 4 seconds to switch increments to 5 minutes.
• The time can be set from 1 minute to 120 minutes
It is displayed when the inner temperature of
the oven reaches 100 °C or above
button to begin preheating.
button, press
to restore default
button, then press the
button to set the time
EN13
Advertisement
