Advertisement
How to use
6
Put in the ingredients
• Place the food on the enamel baking tray, deep baking tray or the cooking rack.
• Insert the cooking rack or enamel baking tray / deep baking tray in the proper position according to the food height.
• After putting in the ingredients, the oven will automatically enter power save mode if you leave
it idle for more than 5 minutes.
7
Begin broiling
• Put in the ingredients, close the glass door, and press the
• You can adjust the temperature and time according to the food property and
personal preference during baking.
• The buzzer sounds "beep-beep-beep", indicating broiling is complete.
8
Take out the food after baking
• Take out the enamel baking tray or cooking rack with holding rack or heat protective gloves.
Be sure to wear the heat protective gloves to take out the deep baking tray.
Note
• Handle gently when opening or closing the glass door.
(To avoid damaging the glass door or scratching the coating of the door handle.)
• Whenthetemperatureishighduringorrightafteruse,donotsplashthecoldwatertotheglassdoor.
9
Remove the power plug
EN14
Manual function
Thetemperaturedisplayshowsthemaximum
temperature set at the Upper and Lower Tube
Temperature
Time to completion
button to begin broiling.
How to use
1
Insert the
AC 220 V
power plug
Standby mode
• If the oven is not operated for more than 1 minute, the screen will
automatically enter power save mode and display nothing.
• In power save mode, the
screen returns to standby mode.
• In power save mode, only the
2
Select menu
In standby mode, press the
button, then press
(Shows selecting Menu "2".).
•
indicates flashing.
3
Set Temperature
(Not applicable to Menu "11")
Press the
button, the upper and lower tubes
temperature is 220 °C by default, and the temperature
displayed on the screen is the menu-recommended
temperature. You can also press the
button to
set the upper tube temperature according to the food
nature and personal preference.
• Whensettingthetemperature,thetemperatureincreasesordecreasesinincrementsof10°C.
• Different menus have different default temperatures.
• If you select upper and lower tubes, the temperature can be set from 70 °C to 230 °C.
• Menu "3" enables only upper tube heating, which can be set to 180 °C at most.
• After setting the temperature, the oven will automatically enter power save mode if
it is not operated for more than 1 minutes.
Preset Menu
button light on, press
button and the
button can be operated.
button to select a desired menu.
After setting the upper tube
temperature, press the
button
again, then press the
button to
set the lower tube temperature.
EN15
Advertisement
